TECH CENTRAL

You are here: Tech Central » Installing springs on AST 5000 Series Shocks




Installing springs on AST 5000 Series Shocks

1. Installing springs on AST 5000 Series struts does not require removing the hose from the top. 2. Remove the rebound knob from the bottom of the shock.

3. Using a 19mm deep socket and preferably an impact wrench to remove the nut on the bottom of the shock.

4. Using a 9mm wrench or deep socket, unscrew the shock shaft from the strut body. Unscrewing is the same as turning clockwise as you look at the shaft.
5. The shock insert once loose can be pulled out from the cylinder. 6. Replace or install the springs desired and reassemble.
6. Replace or install the springs desired and reassemble.

Service Guides